Sorry but this item is currently unavailable.
Please check back at a later stage.
It has the lowest height-over-bore mount in the industry without the hassle of cutting your slide or cost of buying an aftermarket slide! We have put many hours and 1000's of rounds down range with most of the more popular red dot optics on the market with no problems whatsoever! This includes the Burris* Fast* Fire* II & III, Leupold* Delta Point* reflex sights, Docters* II & III, EoTech* MRDS*, Trijicon* RMR,* Vortex Venom and Viper, and many others. The mount itself is secured to the slide via the dove tail with 6 set screws. Two in the dovetail cut and one forward and aft of the dovetail and two more to prevent any shift. This provides a steady, sturdy and rugged mount that will repeatedly hold zero. Other mounting hardware included is 6mm, 8mm and 10mm screws (two of each) that are used to fit and secure most of the popular optics out there. (Depending on what optic you have you will need to find the screws that correlates with your particular optic. There are two special screws for Trijicon RMR. Once you secured the GUM to your slide and found the correct post ( two sets of reinforcing post included) for your optic, go ahead and mount your optic on the post and use the final two longer securing screws to secure your optic to the GUM.
Disclaimer- You may mark your slide when using this mount to properly secure the mount.
It is highly suggested that you have a gunsmith install the GUM and utilize the correct tools for installation.
Leupold Delta Point* can be mounted but not with reinforced posts to secure 100%
UPDATE: We have confirmed compatibility with Vortex Venom Red Dot sights
Trademark* belongs to its manufacturer
1 x mounting hardware screws
- Universal optics mount for most proliferated sites in the field
- Super low-profile
- Ability to use an optic without cutting your slide.
- Sleek solid steel construction
Fits all Models Except 42/43
Width: 1 1/8”
Weight: 1.3 oz (with mounting hardware)